From Meteor Productions
comes a great little improvement set for the Trumpeter F-105G kit. I
have shown the difference in the picture showing the outline of the kit
part and the Cutting Edge replacement. The tail on the Trumpeter kit is
a little off in the rake, size of the rudder and width of the entire
tail. The Cutting Edge set corrects this with a three-piece replacement
tail comprised of a new rudder, tail and small piece for the front
inlet. The set is made of Meteors gray resin that is great to work with
and the first task is to remove these from the casting blocks. I used a
razor saw to get close and sanded away the rest. The rudder fits great
and I used a slight amount of putty to fair in the small front inlet.
The engraved lines are top notch. A side-by-side comparison of the kit
and Cutting Edge parts is also shown. One thing to remember is that the
resin tail will add weight aft and this will necessitate more nose
weight being added to compensate.
In conclusion, this is an
easy replacement set made to Meteor’s high standards that will fix the
shape differences in the tail of the Trumpeter kit. In addition to
this, Meteor also sells part #CEC32154, a resin exterior correction set.
The two together will make a good kit even better. Recommended! |